SOUTHERN NEW HAMPSHIRE PAVER DRIVEWAY INSTALLATION
On this 6000 sqft driveway installation project in Southern NH, Techo Bloc Antika and Villagio pavers were used to create a combination permeable and interlocking paver system. The permeable section was built at the bottom of the driveway slope to collect water runoff. Alliance permeable paver infill stone was used to infill the paver joints to allow water to penetrate in to the system. The interlocking section was installed on the driveway slope and Techniseal RG+ polymeric sand was used to infill and stabilize the paver joints. The use of color banding of the pavers adds aesthetic beauty to the project. A Danfoss under paver heating system melts snow and ice during the winter season. The construction process included removing the old asphalt, removing old base material and replacing it with ICPI approved base material, and installing two layers of soil stabilization geosynthetic fabric. The new base material was installed in 3″ – 5″ lifts and compacted with a Weber CR-8 13500 lb cf compactor to achieve 98% Proctor Density. The pavers were then sealed with a Techniseal Wet Look sealer to enhance and protect the color and durability of the pavers.